TWIN CHECK
Electronic Water-in-Oil / BN Test device
TWIN CHEK was developed to measure water in oil and rest alkalinity in oil simple and in a short time for example on board of a vessel. The test results are readable direct in the display.
Features:
- Parameters to measure
- Water-in-oil
- Measuring range: 0 – 1.0 vol. % H2O
- Measuring time: up to 20 min.
- Accuracy: +/- 3 %
- Base number:
- Measuring range: 0 - 100 BN
- Measuring time: up to 20 min.
- Accuracy: +/- 1 BN
Benefits:
- Saving of costs because malfunction is recognized in time and repairing could avoid damages
- Two test procedures are possible with only one reagent per Test
- Easy to handle even for untrained personnel
- Applicable for all mineral oil based fluids
- Easy to use and for transport
To measure water in oil or the base number only one reagent (WA-SOL® and ALCA Solution) is necessary. The reagent is filled in the bigger chamber of the test device and the oil sample with a 10 ml syringe in the smaller chamber. The device is closed and now the measurement starts while shaking the equipment every 2 minutes for about 10 seconds in a time period of 20 minutes.
Training Video can be found by following this link:
http://www.martechnic.com/eng/videos/testing/alcalinity_twin_check.php
